+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: C80 broken a radar pin connector (/showthread.php?tid=1933)
C80 broken a radar pin connector - PROGECON - 10-07-16 10:22 AM
My C80 has broken a radar pin connector. I'm outside the United States. I opened the C80 and I have in my hands the circuit board has connectors. The pins are soldered to the circuit board and is very difficult to replace ¿Raymarine could sell this circuit board?
RE: C80 broken a radar pin connector - Chuck - Raymarine - Moderator - 10-07-16 10:58 AM
Welcome to the Raymarine Forum PROGECON,
Unfortunately, parts for the C-Series Classic MFDs are now quite limited and the complete set of parts is no longer available. Among, the parts which are no longer available is the part which you have inquired about. However, should you be able to ship the MFD to the US, then it may still be repaired by Raymarine’s Product Repair Center.
RE: C80 broken a radar pin connector - PROGECON - 10-16-16 04:42 PM
I have a friend who will travel to USA in two days. He'll be in Coral Springs Florida.
Which repair center I can send the c80?
Thanks
Jorge
RE: C80 broken a radar pin connector - Chuck - Raymarine - Moderator - 10-17-16 09:44 AM
Jorge,
Raymarine has only one repair center in the US and it's address may be found here and below:
Raymarine Product Repair Center
9 Townsend West
Nashua
NH 03063
USA
+1 603 324 7900