+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: A57D screen movement (/showthread.php?tid=194)
A57D screen movement - check6 - 02-19-16 02:23 PM
I can not get my screen to follow my ship icon . If the icon sails off the sreen the map does not follow it
RE: A57D screen movement - Chuck - Raymarine - Moderator - 02-19-16 02:37 PM
Welcome to the Raymarine Forum Check6,
It is recommended that you verify that you have configured your MFD's Chart application page's/pane's Motion Mode setting (CHART MODE & ORIENTATION->MOTION MODE) to RM (Relative Motion) and Chart Synch (CHART MODE & ORIENTATION->CHART SYNC) setting to OFF. Additionally, operators will typically configure the MFD's Chart application page's/pane's Chart Orientation to N-UP (North Up) when operating offshore and H-Up (Head Up) when operating near shore or inshore. The most commonly used Chart application page/pane configuration settings are Head Up Chart Orientation with a 2/3 Offset to maximize amount of chart displayed ahead of the boat's position.