+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: I40 depth install (/showthread.php?tid=2035)
I40 depth install - Jharvey1215 - 11-01-16 01:41 PM
I wanted to install an additional I40 depth instrument as a repeater into my I70/ITC5 backbone. My question is do I need to install the seatalk1 to seatalkng converter setup or can I simply use the adaptor cable A06047 for the I40 to get the depth data off of the network?
RE: I40 depth install - Chuck - Raymarine - Moderator - 11-03-16 09:54 AM
Welcome to the Raymarine Forum Jharvey,
The i70/i70S, p70/p70R, i50, and i60 products cannot simultaneously be interfaced as a spur to the SeaTalkng backbone and be interfaced via the SeaTalk to SeaTalkng adapter cable to a SeaTalk bus or SeaTalk device (ex. i40, ST60, etc.). In this case, it will be necessary to install a SeaTalk to SeaTalkng Converter within to SeaTalkng backbone to support using the i40 as a repeater.