+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Unable to Load WPTS & Route from CF Card to E120 (/showthread.php?tid=2098)
Unable to Load WPTS & Route from CF Card to E120 - Psychfeld1 - 11-11-16 09:49 AM
Hello Everyone,
I recently created several routes on Voyage Planner and loaded them to a CF card (64 Mb).
When I attempted to upload the info to my E120 Chart Plotter, the MFD did not see the files on the CF card. The E 120 saw the card, and some of the formatting, but not the data. Specifically on my e120 MFD window for Routes was displayed- and there were three routes on the CF card - none of this data was read by e120.
I contacted Sheldon Fould from Voyage Planner --he has been very helpful in the past.
I sent him the Archive.fsh file via email and he was able to upload it --
He thinks now the issue may be with the MFD software.
Thanks kindly,
Rob
RE: Unable to Load WPTS & Route from CF Card to E120 - Chuck - Raymarine - Moderator - 11-15-16 05:33 PM
Welcome to the Raymarine Forum Rob,
In determining whether your CF memory card is compatible with your MFD, we will need to know whether you able to successfully to use the MFD to archive waypoints and/or routes stored within the MFDs memory to your 64MB CF memory card? If so, what version of software is installed within your MFD?