AIS data to two VHF radios - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: AIS (/forumdisplay.php?fid=22) +--- Thread: AIS data to two VHF radios (/showthread.php?tid=2168) |
AIS data to two VHF radios - jrhodes777 - 11-28-16 01:56 PM I have one AIS transponder that is connected to two E127's via NMEA2000 network. One E127 is at an upper helm with a VHF radio and the second E127 is at the lower helm with a second VHF radio. How do I get AIS/GPS data to both VHF radios? The radios have NMEA0183 connections. RE: AIS data to two VHF radios - Chuck - Raymarine - Moderator - 11-28-16 02:37 PM Welcome to the Raymarine Forum jrhodes777 Raymarine MFDs are neither designed to bridge AIS data from SeaTalkng/NMEA 2000 to NMEA 0183 nor vice versa. Accordingly, should your VHF radio support use of NMEA 0183 AIS sentences, then a NMEA 2000 to NMEA 0183 data bridging device (ex. Actisense NGW-1-ISO-AIS, etc.) would be need to be installed between the SeaTalkng/NMEA 2000 backbone and the VHF radios. This same data bridge should support supplying the VHF radios with GPS data. RE: AIS data to two VHF radios - jrhodes777 - 11-28-16 03:52 PM Thanks Chuck. John Rhodes |