+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Raymarine upgrade (/showthread.php?tid=2181)
Raymarine upgrade - Seamonkeys - 11-29-16 06:16 PM
Upgrading electronics and have chosen Raymarine a97 with Digital HD Radar dome. Rep at Raymarine said I can use the same transducer by disconnecting the cable to the grey box and bypassing with a adapter cable. This is where I'm stuck. Which adapter Cable?
RE: Raymarine upgrade - Chuck - Raymarine - Moderator - 11-30-16 09:02 AM
Welcome to the Raymarine Forum Seamonkeys,
Should the currently installed fishfinder transducer be interfaced to a CP370, CP300, DSM300, DSM30, or DSM250 fishfinder sounder module, then the transducer may simply be unplugged from the fishfinder sounder module's TRANSDUCER socket, an E66066 Transducer Adapter would then be connected to the transducer's plug, and finally, the other end of the E66066 Transducer Adapter would be connected to the MFD's TRANSDUCER socket. This solution is applicable to any ax7, cx7, e7D, ex7, or eSx7 MFD.