+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: ECI-100 Reset (/showthread.php?tid=2201)
ECI-100 Reset - liquidether - 12-05-16 11:53 AM
Hi -
I've changed the drive system of my sailboat and my ECI-100 is giving me fault codes not in the fault code list (STNG solid green, DeviceNet cycles 7 red blinks followed by solid red).
The manual says:
"Your ECI-100 will need resetting if it has previously been used on a different engine type."
and
"A specialist tool is required to reset the ECI-100, contact Raymarine Product Support for further information."
So, how do I go about getting it reset?
RE: ECI-100 Reset - Chuck - Raymarine - Moderator - 12-05-16 05:10 PM
Welcome to the Raymarine Forum liquidether,
It is recommended that ECI-100s which need to be reset be sent to Raymarine’s Product Repair Center.
RE: ECI-100 Reset - liquidether - 12-08-16 01:18 PM
It seems I have a problem beyond resetting the ECI-100. My new drive system apparently speaks CANopen and not J1939. Are there any plans to add CANopen mappings to the ECI-100 or your LightHouse software? Thanks.
RE: ECI-100 Reset - Chuck - Raymarine - Moderator - 12-12-16 10:52 AM
liquidether,
What make/model of engine system are you attempting to use in conjunction with the ECI-100?