+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: SeaTalkng, RayNet, and Digital Radar cable and plug dimensions (/showthread.php?tid=2323)
SeaTalkng, RayNet, and Digital Radar cable and plug dimensions - Chuck - Raymarine - Moderator - 01-06-17 09:02 AM
SeaTalkng, RayNet, and Digital Radar cable and plug dimensions
Note: when chasing cables, it is generally recommended that
- cables having the larger diameter plugs be chased before chasing cables having smaller diameter plugs
- should a cable feature plugs of different diameters on each end of the cable, then end of the cable having the smaller diameter plug should be chased
- should one end of a cable terminate in bare leads instead of a plug, then the end of the cable having bare leads should be chased
- cable pulling aids (ex. R70014 RayNet Cable Pullers, an assembly constructed from a SeaTalkng Inline Terminator and a SeaTalkng Termination Pug (drilled to accept a line for chasing, shrink tubing over bare leads and addition of a chasing wire under shrink tubing, etc.) should be used to aid chasing and protect plugs
- the cable's leads and plugs should be protected from damage
- cables should not be subjected to a bend radius which is less than that specified within the product's installation guide.
- kinking of communications be avoided as it can permanently damage cables
- cable chasing lubricant be used to prevent binding
SeaTalkng Backbone and Spur cables have the following approximate dimensional characteristics:
- cable diameter: 0.250"
- plug diameter: 0.450"
- plug length: 1.460"
SeaTalkng T-Pieces have the following approximate dimensional characteristics:
- Length (backbone port to backbone port): 2.270"
- Height (base to spur port: 1.450"
- Thickness: 0.830"
RayNet, SeaTalkhs, and Digital Radar Cable terminated with a RJ45 (M) plug:
RJ45 plug height: 0.400"
RJ45 plug width: 0.550"
length: 1.250"
SeaTalkhs Cable
- cable diameter: 0.230"
- waterproof coupler diameter: 1.250"
- waterproof coupler length: 2.090"
RayNet Cables are available in RayNet to RayNet and RayNet to RJ45. These cables have the following approximate dimensional characteristics:
- cable diameter: 0.230"
- RayNet plug diameter: 0.710"
- RayNet plug length: 1.680
Digital Radar Cables are available in RayNet (F) plug or with RJ45 plug. These cables have the following approximate dimensional characteristics:
- cable diameter: 0.480"
- Digital Radar plug diameter: 0.790"
RAYFAQ#