+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Seatalk hs connect to slave mfd (/showthread.php?tid=2347)
Seatalk hs connect to slave mfd - anovey - 01-11-17 09:01 PM
I have a fusion 750 that I would like to control from the MFD's but I only have a Seatalk HS plug available on the slave MFD (I don't have a network switch and would like to avoid it). Can I plug the fusion in to the slave and have it work? I know I can plug it into the Seatalkng but I have heard it is better in the HS port.
RE: Seatalk hs connect to slave mfd - Chuck - Raymarine - Moderator - 01-12-17 09:59 AM
Welcome to the Raymarine Forum anovey,
Should one of the MFD's within the system feature an Ethernet Network socket which presently does not have a cable connected to it, then the socket may indeed be used to interface the system to the Fusion stereo head unit's Ethernet interface. Should you opt to interface it to a MFD's Ethernet Network socket, then that MFD must be powered ON whenever attempting to use the Fusion app within any of the system's other MFDs. Please click here to view a FAQ addressing this subject.