+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: DownVision Depth (/showthread.php?tid=244)
DownVision Depth - dratchonline - 02-28-16 02:26 PM
How deep will the DownVision work? I fish in 80 to 140 feet of water. Will DownVision work for these depths?
RE: DownVision Depth - Chuck - Raymarine - Moderator - 02-29-16 10:09 AM
Welcome to the Raymarine Forum Dratchonline,
Raymarine products supporting DownVision features (ex. Dragonfly, ax8 MFDs, eSx8 MFDs, and CP100) are designed to support operation in depths up to 600'.
RE: DownVision Depth - fallguy1000 - 08-03-16 08:02 PM
Is Downvision the same as side imaging?
RE: DownVision Depth - Chuck - Raymarine - Moderator - 08-08-16 01:35 PM
Dratchonline,
Q1. Is Downvision the same as side imaging?
A1. No. As the name suggests, DownVision shows what is under the transducer (60 degree cone), while SideVision is designed to provide imaging of structure and fish well out to the sides of the vessel. SideVision is supported by adding a CP200 Sounder Module with CPT-200 Transducer to an a/c/e/eS/gS-Series MFD. See screen snapshot below showing DownVision and SideVision sonar imaging: