+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: wifish in hull transponder (/showthread.php?tid=2467)
wifish in hull transponder - [email protected] - 02-03-17 03:17 PM
I have an Ipad with the Navionics charts and would like to install the Wifish system but hesitant to go with the thru hull mount transponder. By the way this will be installed in my Frers 41 sailboat, sail the Cheseapeake and would like to get a better picture of the bottom since my draft is 7'3" and could use all the forewarnings I can.
Also what ever I end up using can I incorporate my C80 MFD?
RE: wifish in hull transponder - Chuck - Raymarine - Moderator - 02-03-17 05:08 PM
Welcome to the Raymarine Forum mberaud103,
Unfortunately, the CHIRP/DownVision Transducers designed for use with Dragonfly, WiFish, ax8 MFDs, eSx8 MFDs, and the CP100 CHIRP/Down Vision Sounder Module are exclusively designed to be in direct contact with the water. Aside from mobile device integration via the WiFish app, Dragonfly and WiFish products are designed to operate in a stand-alone fashion and accordingly cannot be interfaced with other products such as your C80 MFD.