Raymarine forum
offset - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: offset (/showthread.php?tid=2472)



offset - Bad Bait Bill - 02-05-17 07:57 AM

I am using the offset on my A128 to compensate for the lake level being down from full (normal) pool. This works great right now but is limited to 9.9 feet. Is there some way to increase the offset to a higher number. eg: If the lake is down 15 feet.


RE: offset - Chuck - Raymarine - Moderator - 02-06-17 04:21 PM

Welcome to the Raymarine Forum Bill,

Which offset are you referring to (i.e. where in the MFD's menu is the offset which you are referring to)?