+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: Help with DS400X (/showthread.php?tid=2505)
Help with DS400X - ONE2HUNT - 02-13-17 01:36 PM
Just bought a boat that has a DS400 and put the boat in the water and turned the unit on and all i had was a blue screen with water temp. nothing on depth or speed. Please Help
RE: Help with DS400X - Chuck - Raymarine - Moderator - 02-13-17 01:54 PM
Welcome to the Raymarine Forum ONE2HUNT,
Please click here to view a FAQ addressing this subject. Should the fault isolation indicate a transducer failure, then the problem may be resolved by replacing the transducer with another compatible fishfinder transducer. However, should the fault isolation indicate a failure within the display, then the fishfinder would need to be replaced as Raymarine's Product Repair Center can no longer service DS400X/500X/600X Fishfinders. This class of fishfinder is typically replaced with a Dragonfly 4 Fishfinder or an a67 Multifunction Display.
Regarding Speed (through water) the fishfinder must be interfaced to a fishfinder transducer having a speed through water paddlewheel. Please respond with the model of transducer which has been interfaced to the DS400X.
RE: Help with DS400X - ONE2HUNT - 02-13-17 09:08 PM
Thank You
RE: Help with DS400X - Chuck - Raymarine - Moderator - 02-14-17 10:06 AM
You're welcome.