+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: EV200 Rudder Position Indication (/showthread.php?tid=253)
EV200 Rudder Position Indication - dgulliver - 02-29-16 04:54 PM
Good afternoon,
I am trying to determine what is required to display rudder position to the I70 Multi if I have an EV200. Do I need a rudder reference sensor as with the old systems? I've looked through the docs and not seen mention of this.
If I didn't have an EV200, how would I obtain rudder position?
Thanks in advance for the help!
Best Regards,
Don
RE: EV200 Rudder Position Indication - Chuck - Raymarine - Moderator - 03-01-16 10:21 AM
Welcome to the Raymarine Forum Don,
Should you desire to view rudder position as a data item within your, then it will indeed be necessary to interface a rudder reference transducer (i.e. the M81105 Rudder Reference Transducer) packaged with the ACU-200.
RE: EV200 Rudder Position Indication - dgulliver - 03-01-16 02:50 PM
Thanks Chuck. I looked on the website, downloaded the manuals and could find no mention that a RR was included in the package. It's what I'm used to seeing with the legacy pilots. Thanks for the info!
RE: EV200 Rudder Position Indication - Chuck - Raymarine - Moderator - 03-01-16 07:20 PM
You're welcome.