Raymarine forum
cpt-200 t - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: cpt-200 t (/showthread.php?tid=2646)



cpt-200 t - joe van wagnen - 03-06-17 09:51 AM

good morning!

I really want the cpt-200 sounder but the transom transducer wont work on my twin engine inboard. we really need a tru hull transducer for this unit.
has imar or ray marine working on a thru hull transducer or transducers for this unit?

I have been waiting for a couple of years now and I want it!

Thanks for listening!!

Joe van wagnen


RE: cpt-200 t - Chuck - Raymarine - Moderator - 03-06-17 02:49 PM

Welcome to the Raymarine Forum Joe,

At the time of this response, Raymarine had not announced any plans to introduce a thru-hull transducer for use with a CPT-200. Those desiring a thru-hull transducer to support SideVision imaging are recommended to consider adding an AXIOM RV MFD to the system along with a pair of RealVision 3Dâ„¢ thru-hull transducers.


RE: cpt-200 t - joe van wagnen - 03-07-17 03:51 PM

Chuck

Thanks for your reply.

A few years back I put all new Raymarine electronics in the boat including autopilot and HD radar. I have a E127 and E7 displays. Will they work with the Realvision 3d transducers?
By the way I love the Raymarine equipment I bought. it has worked flawlessly! Using it has made me a better boater. Keep up the good work!!


RE: cpt-200 t - Chuck - Raymarine - Moderator - 03-07-17 04:24 PM

Joe,

We're glad to learn that you appear to be as satisfied with recent Raymarine additions to your boat as much as I am with the equipment installed on my own bot over the last few years. Unfortunately, a/c/e/eS/gS-Series MFDs cannot be directly interfaced to a RealVision 3Dâ„¢ transducer(s)). However, RealVision 3Dâ„¢ sonar features may be supported by your currently installed MFDs. Please click here to view a Thread in which I had previously addressed your latest question.