+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: Type 1 pump adaptor threads don't connect (/showthread.php?tid=2805)
Type 1 pump adaptor threads don't connect - RayJoe46 - 03-31-17 10:31 PM
I have a Raymarine type 1 pump. I am trying to replace the hydraulic hoses. The pump install guide says the pump adaptors are npt thread, but all of the npt threaded fittings I have tried will only screw in about 2 threads. I have gone to 3 different hydraulic hose companies to try and get a hose fitting to fit either the adaptor or the pump direct and have not had any luck. Do I have a poorly threaded adaptor and if so, how can I get replacements.
RE: Type 1 pump adaptor threads don't connect - Chuck - Raymarine - Moderator - 04-03-17 12:09 PM
Welcome to the Raymarine Forum RayJoe46,
Please click here to view a FAQ addressing this subject.