+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Axiom integrated to my existing system (/showthread.php?tid=2846)
Axiom integrated to my existing system - Jepetof - 04-08-17 03:29 PM
Hi, my system consist of a E90W with rd418hd,raystar 130,x10 pilot and anemometer and depht sounder conected to the backbone thru a itc5. My question is: if i add a axiom to my system would i be able to plug the radar directly to it and still be able to see it(the radar) thru my E90W thru the system? The reason for this is that i would like to have a extra back up screen so if my older plotter give up i still be able to navigate with the radar. If not possible what would be my option in order to get the same radar on 2 different screens?
Thanks
RE: Axiom integrated to my existing system - Chuck - Raymarine - Moderator - 04-10-17 10:36 AM
Welcome to the Raymarine Forum Jepetof,
Please click here to view a FAQ addressing this subject. As Raymarine ceased offering C/E-Series Widescreen MFDs several years ago, you may want to consider also replacing the E90W with an Axiom MFD.
RE: Axiom integrated to my existing system - Jepetof - 04-10-17 07:14 PM
Thanks a lot, that answer the question. One last question, seams like there is no rj45 connector at the back of the axiom, how can i plug my radar?
RE: Axiom integrated to my existing system - Chuck - Raymarine - Moderator - 04-11-17 07:50 AM
Jepetof,
Please click here to view a FAQ addressing this subject.