+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket (/showthread.php?tid=2869)
Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket - Chuck - Raymarine - Moderator - 04-11-17 03:21 PM
Adapting cables terminated with RayNet (F) plugs to fit a SeaTalkhs socket
The Ethernet network ports of E-Series Classic MFDs, C-Series Widescreen MFDs, and E-Series Widescreen MFDs feature SeaTalkhs (F) sockets. An A80272 RayNet (M) to SeaTalkhs (M) Adapter would be used to adapt Digital Radar Cables or other Raymarine Ethernet cables terminated with a RayNet (F) plug to be mated an Ethernet port of an E-Series Classic MFD or C/E-Series Widescreen MFD.
Note: Unlike the C/E-Series Widescreen MFDs, E-Series Classic MFDs may not be directly connected to compatible devices having an Ethernet communications interface. Instead, the E-Series Classic MFD must be interfaced to a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch, which in turn will be interfaced to the compatible device(s) having an Ethernet communications interface.
RAYFAQ#