+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: RV-220 transducer kit on 24.5 degree deadrise (/showthread.php?tid=2907)
RV-220 transducer kit on 24.5 degree deadrise - Robinsonh2o - 04-18-17 03:06 PM
Good afternoon,
According the info I can find, the new RV-220 transducer pack can be fitted to a 13-20 degree deadrise. My Contender 31T has a 24.5 degree deadrise. Will the RV-220 pack work or am I forced to get the transom mount RV transducer?
Thanks in advance for any help,
Lynn
RE: RV-220 transducer kit on 24.5 degree deadrise - Chuck - Raymarine - Moderator - 04-19-17 10:11 AM
Welcome to the Raymarine Forum Lynn,
Installing the specified transducer set on a hull having deadrise greater than 20 degrees will create a blind spot under the hull. Unfortunately, Raymarine has not offered a RV thru-hull transducer for hulls having more than 20 degrees of deadrise, leaving only the transom mounted RV transducer option at this time. A feature request will be logged to consider introduction of RV thru-hull transducer from hulls having more than 20 degrees of deadrise.
Please click here more information concerning product and feature suggestions.
RE: RV-220 transducer kit on 24.5 degree deadrise - Robinsonh2o - 04-20-17 06:40 PM
Thank you very much Chuck, your wealth of knowledge is much appreciated!
RE: RV-220 transducer kit on 24.5 degree deadrise - Chuck - Raymarine - Moderator - 04-21-17 07:28 AM
You're welcome.