Analog camera input on G series - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: Analog camera input on G series (/showthread.php?tid=2954) |
Analog camera input on G series - dmahler - 04-25-17 03:14 AM Hi Chuck, Can you please let me know if there is a setting on the G series display that will allow me to reverse the image of an analog camera? Thanks so much. Dave RE: Analog camera input on G series - Chuck - Raymarine - Moderator - 04-25-17 09:25 AM Welcome to the Raymarine Forum Dave, Unfortunately, the feature which you have inquired about is not supported. In order to display a reversed camera image within a system supporting only analog cameras, a reverse image camera (ex. E03021 CAM100 Reverse Image or E03018 CAM50 Reverse Image) must be installed. For systems featuring support for IP cameras (ex. a/c/e/eS/gS-Series MFDs and Axiom MFDs), the web page of the CAM200IP, CAM210, and CAM220 may be accessed via a PC. From the camera's web page, the camera's video image may then be reversed. |