+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Dock to Dock function not present on A65 (/showthread.php?tid=3000)
Pages: 1 2
RE: Dock to Dock function not present on A65 - mpwarz - 07-07-17 03:51 PM
Chuck,
Understand, I do not have the "build Route" which then would take me to dock-to-dock. I have attached pictures to show my screen, also to show my serial number and that I have the 19.03V OS loaded.
RE: Dock to Dock function not present on A65 - Dave - Raymarine - Moderator - 07-10-17 03:12 PM
Hi mpwarz,
Thank you for the attached images and description of your problem.
Did you happen to run a factory reset after updating your MFD?
If you did not, the display may have the old menu still cached.
To factory reset the MFD:
Power down display> Power on display while holding power button> Once the reset menu displays, press the power button one more time to select factory reset.
If the reset does not fix the menu problem, I would try updating and factory resetting again.
- Dave
RE: Dock to Dock function not present on A65 - mpwarz - 07-11-17 09:34 AM
Thanks Dave!
I am getting close to getting this all set! The reset you listed did not seem to work for me. So I went into the manual and did the menu reset under settings and maintenance. I reset using this option and now I have "build a route"! Thanks again for the continued support from you and Chuck on this, it has taken some time and effort, but looks like I am all set to use and learn!
RE: Dock to Dock function not present on A65 - Dave - Raymarine - Moderator - 07-11-17 10:42 AM
Hello mpwarz,
Very glad to hear everything worked out for you! Have fun with your new routes!
- Dave