+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: ST 40 be used to supply info to the autopilot? (/showthread.php?tid=303)
ST 40 be used to supply info to the autopilot? - [email protected] - 03-07-16 03:27 PM
Good Day
I have a customer with the following question:
I currently have a Raymarine ST 40 Wind Instrument and a Standard Horizon CP 180i chartplotter. can the ST 40 be used to supply info to the autopilot? If so what cable would be required to hook together the new pilot and the ST 40. Do you have this cable and how much it it? I estimate it would need to be about 12 ft long.
Is this autopilot compatible with the chart plotter indicated? Not that it has to be but is it?
AUTO PILOT SYSTEM QUOTED, EV400
RE: ST 40 be used to supply info to the autopilot? - Steve - Raymarine - Moderator - 03-08-16 05:01 PM
The EV-400 is a Seatalk NG device, to connect the ST40 you would need to add a Seatalk to Seatalk NG converter, and connect to the Seatalk NG backbone established with the EV-400 autopilot.