+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Engine control Unit (/showthread.php?tid=3112)
Engine control Unit - MarcinZ - 05-16-17 07:04 PM
Is Yanmar engine 4JH5 engine series is compatible with ECI and what is eventual part number for engine harenss.
Martin
RE: Engine control Unit - Chuck - Raymarine - Moderator - 05-17-17 12:03 PM
Welcome to the Raymarine Forum Martin,
Per the ECI-100's Compatibility web page (excerpt below), the 4JH45 would be compatible with ECI-100 if the engine pre-installed with a NMEA 2000 system by the boat's manufacturer. Should you be uncertain of whether this so, then it would be recommended that the boat's manufacturer be contacted to obtain confirmation. Similarly, any information concerning the engine harness would need to be provided by Yanmar or the boat's manufacturer.