+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: SmartController Checksum Error (/showthread.php?tid=3123)
SmartController Checksum Error - PaulM - 05-17-17 10:15 PM
The remote was disconnected from power over the winter and recharged. In past years, this was not a problem. The battery was replaced a year ago.
This year, however, I get a message Checksum Error with a bunch of zeros. Then it says, Press Any Button. When I do, the screen goes blank and the remote is not responsive. Any advice?
RE: SmartController Checksum Error - Chuck - Raymarine - Moderator - 05-18-17 09:18 AM
Welcome to the Raymarine Forum Paul,
Unfortunately, the reported symptom is indicative of a failure within the SmartController's circuitry resulting in loss of its programming. It is recommended that the SmartController be sent to Raymarine’s Product Repair Center to be bench checked / serviced.