+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: 5000+ control head replacement options (/showthread.php?tid=3124)
5000+ control head replacement options - OviV - 05-18-17 07:31 AM
Are there other control heads that I can use to replace the 5000+ that I have which has dying LCD.
RE: 5000+ control head replacement options - Chuck - Raymarine - Moderator - 05-18-17 09:42 AM
Welcome to the Raymarine Forum OviV,
Please note that the ST4000/ST4000+ and ST5000/ST5000+ combine the functions of an autopilot course computer and autopilot control head within a single device. Accordingly the ST5000+ alone could only be replaced with another ST5000+. Alternatively, a p70S Evolution Autopilot Control Head may be interfaced to the ST5000+ via an A06047 Adapter Cable to then permit the p70S to remotely control the ST5000+.
RE: 5000+ control head replacement options - OviV - 05-24-17 01:22 PM
Thank you Chuck. If my ST5000+ is already networked into my other components which include twin c95 screens, do I still have to connect the p70s directly to the ST5000+ or can I just connect it to the hs5 hub? Ideally I would love to control it with my c95 but apparently the autopilot controls are only available on the touch screens.
Ovi
RE: 5000+ control head replacement options - Chuck - Raymarine - Moderator - 05-24-17 01:50 PM
OviV,
SeaTalkng and NMEA 2000 devices cannot be interfaced to a HS5 RayNet Network Switch. The p70S will need to be connected directly to the SeaTalk port of the ST5000+ via an A06057 400mm SeaTalk to SeaTalkng Cable.