+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Axiom (/showthread.php?tid=3158)
Axiom - flbluerunner - 05-22-17 05:47 PM
Greetings,
I am slowly have to upgrade my legacy electronics.
I added an A98 to run a CP570 depthsounder, Just replaced my 10KW radar with a new 12KW which I am controlling with the A98.
My E120 buttons are starting to stick badly.
I would like 2 12 inch screens at my main helm. I also need to replace an E80 in my tower.
My tower unit is in a Navpod, my main helm is flush mounted.
I have an 8002 autopilot that is still working fine.
When I bought the 12KW the vendor I bought from did not realize that I needed a separate power cable causing me to jump through a bunch of hoops to get a cable quickly.
What do you recommend and what will I need to connect all of the components?
Thanks
RE: Axiom - Chuck - Raymarine - Moderator - 05-24-17 01:38 PM
flbluerunner,
1. Are you seeking to interface the new MFDs to the a98 prior to the Q4 2017?
2. Are you seeking RealVision 3D features for the new system?
3. Are you seeking a touchscreen-only interface or hybridTouch interface for the new MFDs?
4. Please respond with the model of autopilot course computer which is presently interfaced to your ST8002 Autopilot Control Head.
5. Please list the makes/models of all other marine electronics components within your system.