+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: Transducer problems with Trolling Motor Bracket F (/showthread.php?tid=3197)
Transducer problems with Trolling Motor Bracket F - Rodster - 05-26-17 02:45 PM
I ordered a new Raymarine Dragonfly Pro 7 and Raymarine Trolling Motor Bracket F (to be mounted to my trolling motor). My installer called me to say that the holes don't line up. It appears that it needs a different connector piece. I have attached a photo that shows the issue. I called and spoke with someone about it and they told me to go to the online manuals. There is nothing online that shows how to mount this and no instructions came with the Motor Bracket. What do I do to make this work?
RE: Transducer problems with Trolling Motor Bracket F - Chuck - Raymarine - Moderator - 05-31-17 03:38 PM
Welcome to the Raymarine Forum
The A80207 trolling motor transducer mounting bracket was designed to accommodate the CPT-100 and CPT-60 tranducers, not the CPT-DV, CPT-DVS, and CPT-100DVS transducers. The correct trolling motor mounting bracket for the CPT-DV, CPT-DVS, and CPT-100DVS transducers is A80330.