+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: Getting routes from PC to G120/GPM400? (/showthread.php?tid=3236)
Getting routes from PC to G120/GPM400? - weisbergj - 05-31-17 10:48 AM
Hi Chuck,
I use Coastal Explorer on my PC to plan out my routes. Currently, when finished, I export the route from CE to a GPX file, and use Raymarine Voyage Planner to convert to a .fsh file, which I copy to a CF card, place into one of my GPM400s, and then import the routes.
I'm looking for a more steamlined process. My laptop running CE is connected to a Vesper XB-8000 (which is on my SeaTalk ng network), and acts as a NMEA repeater.
I've tried to send the route from CE to the GPM400, but it appears that the GPM only receives over NMEA0183.
Do you have any suggestions on how I could get the routes to the GPM without using the CF card?
Thank you,
Josh
RE: Getting routes from PC to G120/GPM400? - Chuck - Raymarine - Moderator - 05-31-17 10:55 AM
Welcome to the Raymarine Forum Josh,
The only means of waypoint/route transfer supported by the GPM400 include the following:
- via a CF memory card which has been populated with an Archive.fsh file (retired Raymarine proprietary waypoint/route/track format) in its root level directory
- via the GPM400's NMEA 0183 communications interface.
The GPM400 does not support transfer of waypoint/route/track data via its SeaTalkng / NMEA 2000 communications interface.
RE: Getting routes from PC to G120/GPM400? - Chuck - Raymarine - Moderator - 06-01-17 09:00 AM
You're welcome.