[CA] [CA11] Replace C120 Classic with E120 Classic? - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [CA] [CA11] Replace C120 Classic with E120 Classic? (/showthread.php?tid=3306) Pages: 1 2 |
RE: [CA11] Replace C120 Classic with E120 Classic? - willyritch - 06-11-19 11:41 AM I finally got all the pieces necessary to get the sounder working--the DSM30 is now connected to my E-Series display via a cable assembly constructed from a pair of SeaTalkhs to RJ45 (M) Cables which have been joined with a SeaTalkhs Crossover Coupler. It all works but every 5-10 minutes the display loses contact with the transducer or the DSM 30 and I get an alarm. It usually comes back online after a few seconds. Any suggestions on troubleshooting? Thanks. w RE: [CA11] Replace C120 Classic with E120 Classic? - Chuck - Raymarine - Moderator - 06-11-19 01:40 PM willyritch, Please click here to view a FAQ addressing this subject. The referenced FAQ also applies to loss of communications with the transducer. |