+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Upgrade from C80 to C95 (/showthread.php?tid=3376)
Upgrade from C80 to C95 - djpfinancial - 06-19-17 04:41 PM
Okay, I know this can't be that difficult, but we are getting many different answers.
I have an e127 and my buddy saw it and wanted to upgrade his C80.
So, the decision has been made by him to go with a C95. Great, that's all set.
The Problem:
The C 80 has 3 connections that are being used.
1 - Power Plug. This is self explanatory...Got it
2 - GPS / Antenna three wire sort of flat plug. NOT going to use the external GPS, so just tie it back and do not use it. Done...
3 - Round 5 pin connector hooked into the NEMA In/Out port. This is for very limited Smart Craft transfer as best a I can tell. Depth, speed, course direction.
How do we interface this with the new c95?
Thanks,
Dave
RE: Upgrade from C80 to C95 - Chuck - Raymarine - Moderator - 06-20-17 02:56 PM
Welcome to the Raymarine Forum Dave,
Please click here to view a FAQ addressing this subject. See the portion of this FAQ addressing NMEA 0183.
RE: Upgrade from C80 to C95 - djpfinancial - 06-21-17 07:24 AM
Chuck,
Thanks for the links.
Will it be an easy color match up or will there be a chart?
Thanks,
Dave
RE: Upgrade from C80 to C95 - Chuck - Raymarine - Moderator - 06-21-17 01:53 PM
Dave,
The NMEA 0183 leads of a c/e/eS/gS-Series MFD Power/NMEA 0183/Video Input cable utilize the same color codes featured by the NMEA 0183 cable of the C-Series Classic MFDs.