+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: ST-HS (/showthread.php?tid=342)
ST-HS - fireboat - 03-11-16 11:51 AM
I have a ST-HS network. Will this connect directly to an ES128 or do I need a Raynet(M) to ST-HS adapter cable? I'm replacing a Classic E120 and do not have the ES128 yet so I cannot see the back of the unit and the pdf manual does not show a readable picture.
RE: ST-HS - Chuck - Raymarine - Moderator - 03-11-16 01:28 PM
Welcome to the Raymarine Technical Forum fireboat,
Please click here to view a FAQ addressing this subject.
Please note that the a/c/e/eS/gS-Series MFDs may not be interfaced to an Ethernet (SeaTalkhs/RayNet) network featuring any models of MFDs other than a/c/e/eS/gS-Series (note the letter case) MFDs. As such, should the present system feature another E-Series Classic MFD, then the eS128 MFD which you are seeking to add would not be able to be added to the system's Ethernet network until the other E-Series Classic MFD(s) has been removed from the Network.
When replacing an E-Series Classic MFD with an a/c/e/e/S/gS-Series MFD, the currently installed SeaTalkhs Cable which has been interfacing the E-Series Classic MFD to the system's Ethernet Network may be adapted to be mated to the Ethernet Network (RayNet) socket of an a/c/e/e/S/gS-Series MFD by installing an A80160 SeaTalkhs (F) to RayNet (F) Adapter between the currently installed SeaTalkhs Cable and the a/c/e/e/S/gS-Series MFD's Ethernet Network (RayNet) socket.