Raymarine forum
SR100 question - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Weather / Satellite Radio (/forumdisplay.php?fid=119)
+--- Thread: SR100 question (/showthread.php?tid=3529)

SR100 question - Mick - 07-11-17 04:18 PM

Is there a way to confirm the integrity of the antenna, other than the indicator light on the SR100? i.e. Is there a way to see antenna signal strength? The SR100 is connected to a classic E80.

RE: SR100 question - Chuck - Raymarine - Moderator - 07-19-17 01:59 PM

Welcome to the Raymarine Forum Nick,

When viewing a Weather application page/pane, satellite signal strength (no signal, low, medium, high) is listed on the right side of the page's titlebar. Should the satellite signal strength field instead report No Connection, then it would indicated that Ethernet communications between the MFD and the SiriusXM Satellite Weather Receiver is not occurring.

[Image: attachment.php?aid=1170]