+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: GyroPlus 2 / Smart Heading Sensor function with MARPA (/showthread.php?tid=3555)
GyroPlus 2 / Smart Heading Sensor function with MARPA - Miked - 07-15-17 11:06 AM
My electronics includes 2x E120 MFD, analog radar,RS 125 GPS, and GyroPlus 2 smart heading sensor.
I also have a N2000/SeaTalkNG network interfaced to the E120 for engine monitoring.
It also includes a B&G Network Pilot Autopilot which is about to be replaced with a Raymarine Evolution 150 autopilot with the EV Sensor Core.
My understanding is that the only function that the GyroPlus 2 provides is turn rate input required for MARPA.
When I install the Evo 150 system, is the GyroPlus 2 still required?
Will the Evo Sensor Core provide the same information to the E120 ( via the Seatalk NG interface) ?
thanks,
Mike
RE: GyroPlus 2 / Smart Heading Sensor function with MARPA - Chuck - Raymarine - Moderator - 07-18-17 03:30 PM
Welcome to the Raymarine Forum Mike,
When the E-Series Classic MFD has been updated with the v5.69 software update and the Evolution autopilot components have been interfaced to the MFD via SeaTalkng, then the MFD w/GPS and radar inputs will be supplied with all remaining data required to support MARPA. Accordingly, the GyroPlus 2 / Smart Heading Sensor should be removed from the system when the Evolution autopilot is installed.