+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: ST800/P120 (Plastic) vs. (Bronze) (/showthread.php?tid=3643)
ST800/P120 (Plastic) vs. (Bronze) - Marinerjoe - 07-27-17 09:54 AM
Chuck,
The thermister in my ST800/P120 (Bronze) transducer that's connected to a CP370 has failed (currently reading ~ 104 degrees). I do NOT need to replace the thru-hull, only the transducer.
My question, will the transducer from the Plastic (E66071) fit the Bronze (E66072) thru hull? There's a significant cost savings if I go with the Plastic.
Feature suggestion - if they ARE interchangeable, please offer just the transducer at a correspondingly lower cost.
Thanks in advance,
Joe
RE: ST800/P120 (Plastic) vs. (Bronze) - Chuck - Raymarine - Moderator - 07-27-17 11:11 AM
Welcome to the Raymarine Forum Joe,
The Speed/Temp insert is indeed the same between the E66071 ST800 / P120 (Plastic) Speed/Temp Fishfinder Transducer and the E66071 ST800 / P120 (Bronze) Speed/Temp Fishfinder Transducer. Please click here to view a FAQ addressing where one may obtain transducer parts.
RE: ST800/P120 (Plastic) vs. (Bronze) - Marinerjoe - 07-28-17 09:50 AM
Thanks Chuck. I'll keep that FAQ handy.
Joe