+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: Connections to a sG125 (/showthread.php?tid=3668)
Connections to a sG125 - rycsailor - 07-31-17 09:54 AM
When connecting a sG 125, does one connect both the MFD and the SeaTalk starter kit to the 12 Volt power source?
RE: Connections to a sG125 - Chuck - Raymarine - Moderator - 07-31-17 09:58 AM
rycsailor,
As Raymarine MFDs, AIS Transceivers, Autopilot ACUs, VHF radios, SiriusXM Satellite Weather Receivers, radomes, radar pedestals, fishfinder sounder modules, and Ethernet Network Switches are neither designed to be powered via a SeaTalkng/NMEA 2000 backbone nor an Ethernet network, these products should be powered using the power cables which these products have been manufactured with/packaged with or via the product's power terminals.