+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: ax7 transducer plug, pin diagram (/showthread.php?tid=3694)
ax7 transducer plug, pin diagram - kechikan - 08-02-17 07:07 PM
Hello,
Looking at all the information its been posted, I saw a diagram of the transducer conector pins on the ax7 MDF, now I want to go back to it to take a closer look and I can't find it.
Could you post it or let me know were to find it?
Thanks.
RE: ax7 transducer plug, pin diagram - Chuck - Raymarine - Moderator - 08-03-17 08:34 AM
Welcome to the Raymarine Forum kechikan,
Please click here to view a FAQ addressing this subject. Please note that any damage caused to the MFD's fishfinder circuitry resulting from modification of a transducer (to include its cable) or use of transducers other than those which have been designed for use with a/c/e/eS/gS-Series MFDs may void the MFD's warranty. Should you be unable to replace the currently installed thru-hull transducer, the hull is manufactured from solid, non-cored fiberglass which is less then 5/8" thick, then you may want to consider installing an A80170 P79 In-Hull Fishfinder Transducer.