+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Connecting Raymarine Axiom 7 to Command Link (/showthread.php?tid=3744)
Connecting Raymarine Axiom 7 to Command Link - steaua1986 - 08-10-17 11:22 AM
I have a 2014 Yamaha F300 OB with command link (and hub port available). Is there a way to connect the Axiom 7 directly to the hub, without building a NMEA network?
Thanks.
RE: Connecting Raymarine Axiom 7 to Command Link - Chuck - Raymarine - Moderator - 08-17-17 11:23 AM
Welcome to the Raymarine Forum steaua1986,
Raymarine does not support interfacing engines systems directly its products. Instead, Raymarine recommends that an engine gateway be used. In this case the ECI-100 would be applicable. Please click here to view a FAQ addressing this subject.