+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: ST2000+ broken gaskets (/showthread.php?tid=3866)
ST2000+ broken gaskets - Maluhia - 08-26-17 08:39 AM
I found some broken gasket parts inside our ST2000+.
Is one of them from the pushrods exit end of the unit?
Appears as though the other one might be a bushing from behind the largest gear on the belt/gear arrangement?
Are these parts available?
The unit was failing due to these parts falling underneath the internal compass gimbal, restricting its movement.
RE: ST2000+ broken gaskets - Chuck - Raymarine - Moderator - 08-28-17 03:59 PM
Welcome to the Raymarine Forum Maluhia,
Raymarine does not consider the ST2000+ to be an end user repairable item. Accordingly, internal parts and repair instructions are not available. It is recommended that the ST2000+ be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
RE: ST2000+ broken gaskets - Maluhia - 08-29-17 02:48 PM
Thanks Chuck.
Removed gasket shrapnel, unit tested o.k. in 5 foot waves and 18-20 kits of wind in AUTOmfor an hour or so. It did experience a power interruption, but immediately turned back on in STANDBY mode. (it was powering off before after a few minutes of use, and not coming back on)
RE: ST2000+ broken gaskets - Chuck - Raymarine - Moderator - 08-29-17 04:19 PM
You're welcome.