+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: connecting RS 150 to C60 MFD (/showthread.php?tid=3895)
connecting RS 150 to C60 MFD - J34C - 08-30-17 10:31 AM
Because of the location of the MFD and the RS 150 I need to splice a cable to the Seatalk cable connected to the MFD and then to the Seatalk\Seatalk ng converter cable which is connected to the convertor kit widget. I think I have that done correctly but the antennae isn't getting 12v (the LED on the top is dark). Any suggestions?
RE: connecting RS 150 to C60 MFD - Chuck - Raymarine - Moderator - 08-30-17 12:07 PM
Welcome to the Raymarine Forum J34C,
Please note that Raymarine has never produced a MFD having the name C60. Should the MFD actually be a C70 or C80 C-Series Classic MFD, then a SeaTalk to SeaTalkng Converter Kit, not a SeaTalk to SeaTalkng Cable would be used to interface these two products to one another. Please click here to view a FAQ addressing how a C-Series Classic MFD would be interfaced to a Raystar 150 GPS Sensor.