p70s Incorrect Display of EV-1 Compass Deviation Value? - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: p70s Incorrect Display of EV-1 Compass Deviation Value? (/showthread.php?tid=3902)

p70s Incorrect Display of EV-1 Compass Deviation Value? - Dan_Y - 08-31-17 10:42 AM This is a minor issue and may stem from s/w configuration. I have an Axiom 9 networked to an EV-1/ACU-100 Wheel Pilot via a STng network. The EV-1 is the only source of heading info. The EV-1 compass linearization was performed successfully (4 degrees of deviation) but did not perform “Align Compass GPS” due to good agreement between ships compass and EV-1 magnetic heading. Axiom has v3.1.96, EV-1 v1.11, ACU-100 v1.12 and p70s v3.06. At the p70s using Menu > Set-up > Diagnostics>About Pilot>Details, the correct deviation is displayed by the EV-1. Also at the p70s using Menu > Set-up > Diagnostics>About System and selecting the “This Display, Raymarine p70s Control Head”>Details, the correct deviation is also displayed. But when selecting Menu > Set-up > Diagnostics>About Display>Details, the deviation value only shows “- - -“. This data is identical to that in the “This Display, Raymarine p70s Control Head”>Details, but without the deviation. The Axiom correctly displays the deviation. Attachments of screen captures included. Thanks Dan_Y RE: p70s Incorrect Display of EV-1 Compass Deviation Value? - Chuck - Raymarine - Moderator - 08-31-17 03:50 PM Dan, Thanks for pointing out this issue. I have been able to duplicate it and a problem report will be generated accordingly. RE: p70s Incorrect Display of EV-1 Compass Deviation Value? - Dan_Y - 08-31-17 07:22 PM Thanks again for looking into this Chuck. I greatly appreciate the effort your team puts in to improving "our" systems. Dan