+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [DG] [DG11] 400G AST, ST6001+ auto pilot system malfunctioning (/showthread.php?tid=3990)
Pages: 1 2
RE: [DG11] 400G AST, ST6001+ auto pilot system malfunctioning - nscott54 - 05-03-18 03:16 AM
Thx for s/w info. Checked my devices - all latest s/w rev.
How do I set P70s manual variation to local value?
Thx
Neil
RE: [DG11] 400G AST, ST6001+ auto pilot system malfunctioning - nscott54 - 05-03-18 04:09 AM
I found the manual variation step. Track mode appears to be working. Thx.
Neil
RE: [DG11] 400G AST, ST6001+ auto pilot system malfunctioning - nscott54 - 08-27-19 04:17 PM
After many months of being able to activate track mode, i am now faced again with the “no navigation data†alert message.
My equipment is unchanged from that outlined at the start of this thread. I must have inadvertently disabled this function.
I cannot recall how to “check that manual variation is selected in the p70s to the local valueâ€.
Could you please elaborate on the steps needed to achieve this.
Thank you.
Neil
RE: [DG11] 400G AST, ST6001+ auto pilot system malfunctioning - Derek - Raymarine - Moderator - 09-04-19 08:02 AM
Hi Neil
The variation should be entered into the p70 control head, access the MENU, then select SET-UP, then select USER PREFERENCES and adjust variation to the current local value.
Kind regards
Derek