+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Axiom v3.2.86 reboots (/showthread.php?tid=3992)
Axiom v3.2.86 reboots - qbayle - 09-19-17 09:03 AM
when powering down data master, slave reboots
RE: Axiom v3.2.86 reboots - Chuck - Raymarine - Moderator - 09-19-17 09:53 AM
Welcome to the Raymarine Forum qbayle,
It is quite possible that the observed behavior may occur. The non-Data Master MFDs are very much dependent upon communications with the Data Master MFD. Should one not be shutting the equipment down by switching OFF the breaker / circuit switch supplying power to the MFDs, then it would be recommended that the non-Data Master MFDs be switched OFF prior to switching OFF the Data Master MFD. I favor using the breaker / circuit switch to control the power state of the MFDs.
RE: Axiom v3.2.86 reboots - qbayle - 09-19-17 10:05 AM
So it's okay to just use a switch to power off the units vs using the shutdown button then a switch to shut off the power?
RE: Axiom v3.2.86 reboots - Chuck - Raymarine - Moderator - 09-19-17 11:20 AM
Qbayle,
Is is indeed permissible to power the MFDs ON/OFF via the circuit supplying the MFDs with power. Please click here to view a FAQ addressing this subject.