Raymarine forum
Quantum WiFi Power Wiring - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: Quantum WiFi Power Wiring (/showthread.php?tid=4043)



Quantum WiFi Power Wiring - OTR - 09-28-17 01:17 PM

Hi, I am using a Q24W with an E7D via WiFi. In the manual it says it can be wired dircectly to the battery (fused, obviously). I have done this as the nearest switched power source is quite a ways from my radar dome. I am wondering what the power consumption is when the display is off and radar is off? I have shore power and a charger so it’s not a big deal, just curious.

Also, do I have to turn the scanner off when I power off the e7d, or does it “know” the display is turned off?


RE: Quantum WiFi Power Wiring - Chuck - Raymarine - Moderator - 09-28-17 01:41 PM

Welcome to the Raymarine Forum OTR,

Please see the excerpt below from the Quantum Radome's Specifications page addressing your power consumption question. After losing communications with the MFD as a result of switching the MFD OFF, the Quantum Radome will enter Sleep Mode.

[Image: attachment.php?aid=1316]