+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Axiom Standard version or all with Realvision & Sonar (/showthread.php?tid=4093)
Axiom Standard version or all with Realvision & Sonar - DRFASailboater - 10-09-17 02:25 PM
I am wondering if when i go to purchase a Axiom display and when purchasing more then one for use at multiple stations on-board. If i should be purchasing Axiom displays with each having Realvision and Sonar or if one would only be required to have these Features to make use of a the thru-Hull realvision transducer?
Lets say i have three stations on my vessel and at each place there will be a Axiom MFD. I am considering purchasing two 9" and one 12" and i noticed that i could either buy just the display itself or a display with Realvision and Sonar600w. I take it that i would be needing the Realvision and Sonar at each station i would like to receive this detailed information at. But i would like to clarify this if possible. I'd be useing a Realvision thru-hull to acquire a underwater perspective of conditions and any fish about, as well.
  Â
RE: Axiom Standard version or all with Realvision & Sonar - Chuck - Raymarine - Moderator - 10-09-17 03:06 PM
Welcome back to the Raymarine Forum DRFASailboater,
As Raymarine Axiom MFDs and Axiom Pro MFDs are designed to share all system data and resources (except for NTSC/PAL video) with one another when interfaced via an Ethernet network, only one of the Axiom MFDs need be equipped with RV fishfinder circuitry and RV transducer and/or compatible 600W 50kHz / 200kHz fishfinder transducer.