+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: NAVAIDS (/forumdisplay.php?fid=122)
+--- Thread: NMEA loads on a STng to NMEA convertor (/showthread.php?tid=415)
NMEA loads on a STng to NMEA convertor - Lew Springer - 03-22-16 02:43 AM
I need to provide NMEA0183 GPS signals to 4 devices: 2 VHF radios, 1 AIS and 1 NAIAD stabilizer. How many NMEA0183 loads can be driven by a single model E70196 STng to NMEA convertor?
RE: NMEA loads on a STng to NMEA convertor - Chuck - Raymarine - Moderator - 03-22-16 08:06 AM
Welcome to the Raymarine Forum Lew,
Raymarine products featuring a NMEA 0183 output port are designed to support being able supply data to up to three NMEA 0183 listeners. Should additional NMEA 0183 listeners require GPS data from the SeaTalkng backbone, then it is recommended that an additional SeaTalk to SeaTalkng Converter(s) be installed to support supplying data to the additional NMEA 0183 listeners. Alternatively, a third party NMEA 0183 expander may interfaced to the NMEA 0183 output of the SeaTalk to SeaTalkng Converter to support the additional NMEA 0183 listeners.
RE: NMEA loads on a STng to NMEA convertor - Lew Springer - 03-22-16 09:57 AM
Thank you !
RE: NMEA loads on a STng to NMEA convertor - Chuck - Raymarine - Moderator - 03-22-16 10:11 AM
You're welcome.