Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o (/showthread.php?tid=4169) |
Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o - Bill Shepherd - 10-23-17 02:53 PM I am installing an EV-100 wheel pilot on to my Seatalk backbone for use with my e127 MFD. I have an Airmar heading sensor installed about 5 years ago. It looks like the EV1 sensor core should replace the Airmar, but I want to confirm. RE: Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o - Chuck - Raymarine - Moderator - 10-23-17 03:19 PM Welcome to the Raymarine Forum Bill, The EV-1/2 combines the functions of course computer and heading sensor within a single component. Evolution autopilots will exclusively accept heading data from the system's EV-1 or EV2 CCU. |