Axiom software update - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: Axiom software update (/showthread.php?tid=4199) Pages: 1 2 |
RE: Axiom software update - wdbox - 11-14-17 10:48 AM I think that I have finally got it. Just to be sure before I start spending and cutting up my panel. Once I install the RCR-SDUSB reader than I can install the Navionics card in the reader instead of the MFD and my charts will display normally. For software updates I would remove the Navionics card and install the update card in the reader which will update both MFD's. Once the update is finished, I would reinstall the Navioics card and resume normal operation. RE: Axiom software update - Chuck - Raymarine - Moderator - 11-14-17 11:59 AM wdbox, Q1. Once I install the RCR-SDUSB reader than I can install the Navionics card in the reader instead of the MFD and my charts will display normally. A1. Correct. Q2. For software updates I would remove the Navionics card and install the update card in the reader which will update both MFD's. A2. Correct. Q3. Once the update is finished, I would reinstall the Navioics card and resume normal operation. A3. Correct. RE: Axiom software update - wdbox - 11-15-17 01:48 PM Thank you for all your help. Sorry it took so long for me to understand the process. RE: Axiom software update - Chuck - Raymarine - Moderator - 11-15-17 02:18 PM You're welcome. |