+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Update RAY52 from AXIOM (/showthread.php?tid=4256)
Update RAY52 from AXIOM - jpmejia - 11-13-17 12:55 PM
I just upgraded all the electronics of my boat.
When I tried to update all the devices from the AXIOM (With the latest update on it), I was able to update almost everything successfully (LOVE IT).
The one exception was my RAY52 that did not apear on the list of devices on the AXIOM.
1- Is this normal?
2- I double checked all the connections, but how can I check that the RAY52 is successfully connected to my Seatalk ng?
3- Suggestions?
Thanks,
JP
RE: Update RAY52 from AXIOM - Chuck - Raymarine - Moderator - 11-14-17 03:50 PM
Welcome to the Raymarine Forum JP,
The Ray50/Ray52/Ray60/Ray70/Ray260 may be updated via an Axiom MFD. However, the software update for the Ray50/Ray52 is a bit unique when compared to the other peripherals and it may be possible that it may not be updated by using the MFD's Wi-Fi communications interface to download software updates from the Internet. Accordingly, I would recommend updating the Ray50/Ray52 via a microSD memory card. The software update file(s) and instructions for performing the software update may be found here.