+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: ST60 Wind Transducer (/showthread.php?tid=4265)
ST60 Wind Transducer - Stburch - 11-14-17 12:34 PM
My St60 Wind Transducer (Wind direction) has stopped moving. After removing it from the masthead, it was discovered that it is rusty/corroded and is likely in need of replacement. My question is: Can I use the same cable and purchase a R28170 or would I need to purchase the E22078 with the cable?
Thanks,
Steve
RE: ST60 Wind Transducer - Chuck - Raymarine - Moderator - 11-15-17 01:07 PM
Welcome to the Raymarine Forum Stburch,
Q. Should damage be restricted to the transducer itself, then the masthead block and its cable may be retained for use within a new R28170 Short Arm (14-1/2") Masthead Transducer or a R28171 Long Arm (26-1/2") Masthead Transducer.
RE: ST60 Wind Transducer - Stburch - 11-15-17 04:16 PM
That's great news. The existing cable is fine.
Thanks for your prompt response.
Steve
RE: ST60 Wind Transducer - Chuck - Raymarine - Moderator - 11-15-17 04:18 PM
You're welcome.