+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: Display Lighting for ST60 Speed Inst. (/showthread.php?tid=428)
Display Lighting for ST60 Speed Inst. - ToddL214 - 03-24-16 10:05 AM
My ST60's (A22001-P), appears to be functioning correctly with the exception of the display lighting, (Wind and Depth, are each 100%).
My question(s) would be...
1. If the bulbs(?) are out is this a repair a user can accomplish?
2. Are there any troubleshooting procedures or product diagrams published or recommended that I should try/use?
3. Barring great news in response to #1 or #2 above; does anyone have an "out of the box" suggestion?
Thanks in advance for your assistance.
Sincerely,
Todd L.
RE: Display Lighting for ST60 Speed Inst. - Steve - Raymarine - Moderator - 03-24-16 02:53 PM
It is not a bulb, it is an LED on a PCB. It is not user repairable.
Only troubleshooting would be check the backlight level and changing the level, if the unit doesn't get brighter or there is no lighting at all. It will confirm the display should be sent to the below address to be evaluated by a service technician for repair.
Raymarine Service Center
9 Townsend West
Nashua, NH 03063
Include in the box:
Name
Daytime Phone
Return address
Brief description of the issue